1 2

AEA Ribbon Mics | AEA1029C0001

AEA 1029

AEA 1029

€1.899,00
€1.899,00
Znižanje Razprodano
Davki vključeni.
Custom ordered for you: Inquire for a delivery timeframe.

AEA 1029

The AEA 1029 is our Ultra-Clean Stereo VCA Compressor featuring a proprietary discrete op-amp design in a half-rack chassis

1029 Overview

  • Half-rack form factor
  • 2 channels of XLR in and out
  • 3 position Peak Fast, RMS, and Peak Slow sensing times
  • Variable threshold from -20dBu to 20dBu
  • Up to 20dB of makeup gain
  • Dry/Wet percentage control knob
  • True bypass relay switching
  • Circuit, including discrete op-amp, designed by Fred Forssell
  • Made in the U.S.A.
Prikaži vse podrobnosti
>>

Opis izdelka

Smooth Compression, Perfect Clarity

From subtle smoothing to brickwall limiting, the AEA 1029 provides ultra-clean compression that you have to hear to believe.

  • The AEA 1029 utilizes a proprietary discrete op-amp design by Fred Forssell and two THAT 4305 VCA chips run off of a single RMS detector being fed by the summed input signals. This design results in a versatile compressor with a clear and balanced sound perfect for taming vocals or smashing drum overheads. Designed to pair well with our TRP and RPQ series preamps, the 1029 Stereo VCA compressor is perfect for recording and/or mixing stereo microphones.
  • Packed into a sleek, half-rack design – the AEA 1029 is perfect for desktop use or for those looking to save space in their rack. But don’t let its size fool you, the 1029 is a full-featured compressor that packs a punch. With 3 position Sensing Time (Peak Fast, Slow, and RMS) and a variable ratio from 1:1 – Limit, the 1029 can go from subtle to extreme as you see fit. Equally at home in a bedroom or professional studio, the AEA 1029 is the perfect addition to any engineer’s toolkit.
>>

Lastnosti in specifikacije

AEA 1029 Specifications

Input Impedance: 10 kΩ Actively Balanced
Max Input Level: +26 dBu
Input CMRR: Better than 70dB (22Hz to 22kHz)
Output Stage: 50 Ω Active Balanced Floating
Max Output Level: +26 dBu Balanced Load, +22 dBu Unbalanced Load
Minimum Load Impedance: 600 Ω

Signal-to-Noise Ratio: Dry: -97dBu, Wet: -91dBu

Frequency Response
Dry: 10 Hz to 200 kHz (+0 dB, -0.05 dB)
Wet: 10 Hz to 200 kHz (+0 dB, -0.1 dB)
Input and Output XLR Polarity: Pin 2 +, Pin 3 -
Absolute Phase: Non-inverting

Attack and Release Times
Peak Fast: 4ms attack, 17ms release
RMS: 12ms attack, 50ms release
Peak Slow: 4ms attack, 200ms release

LED Signal Level Indicators
7 Segment LED Meters: -20, -12, -4, 0, 6, 10, 20 (6dB before clipping)

Gain Reduction Indicator
6 Segment LED Meter: -1, -2, -3, -6, -9, -12dB gain reduction

Power Consumption: 6 Watts
Line Voltage: 100 to 240 VAC

Dimensions: Half-rack wide (8.5 in), 1 rack unit high (1.8 in) 8 in deep (measured with knobs) (21.59 cm x 20.32 cm x 4.6 cm)
Weight: 2 lb 6oz (~0.9 kg)
Power Supply Weight: 1 lbs 1 oz (~0.5 kg)
Power Supply Length: 7 feet 8.5 inches (2.3 m), Power supply lengthmay be supplemented with longer IEC cable.

In compliance with the following requirements: RoHS2 Directive: 2011/65/EU

Media

Hear it in Action!

> > >

Dokumenti
AEA 1029 Specifications PDF
AEA 1029 Owners Manual PDF

Informacije GPSR

Informacije o proizvajalcu

Audio Engineering Associates
1029 N. Allen Ave., Pasadena, CA 91104, USA
AEA Contact Form
aearibbonmics.com

Informacije o uvozniku

Klemm Music Technology e.K.
Sebastian-Kneipp-Str. 96, 37217 Ziegenhagen, Deutschland
info@klemm-music.de
klemm-music.de

Opozorila in varnostne informacije

  • Nevarnost električnega udara – Nikoli ne odpirajte naprave, ko je priključena na napajanje, saj so v notranjosti prisotne visoke – potencialno smrtno nevarne – omrežne napetosti. Vzdrževalna dela prepustite izključno usposobljenemu strokovnemu osebju.
  • Voda in vlaga - Enote ne uporabljajte v bližini virov vode ali v prekomerno vlažnih okoljih.
  • Vstop predmetov in tekočin - Paziti je treba, da skozi odprtine v ohišje ne padejo predmeti in se ne polijejo tekočine.
  • Prezračevanje - Pri namestitvi enote v stojalo ali na katero koli drugo mesto poskrbite za ustrezno prezračevanje. Neustrezno prezračevanje povzroči pregrevanje in lahko poškoduje enoto.
  • Toplota - Enota mora biti nameščena stran od virov toplote ali druge opreme, ki proizvaja toploto.
  • Viri napajanja - Enota mora biti priključena samo na napajanje tiste vrste, ki je opisana v navodilih za uporabo ali označena na enoti.
  • Zaščita napajalnega kabla - Napajalni kabli za izmenični tok morajo biti napeljani tako, da ni verjetno, da bi nanje stopili ali bi jih stisnili predmeti, postavljeni nanje ali ob njih. Posebno pozornost posvetite kablom pri vtikačih, vtičnicah in mestu, kjer izstopajo iz enote. Nikoli ne prijemajte vtiča ali kabla z mokrimi rokami. Pri priključitvi ali odklopu vedno primite za ohišje vtiča.
  • Obdobja neuporabe - Napajalni kabel enote izključite iz vtičnice, če je dlje časa ne uporabljate.
  • Poškodbe, ki zahtevajo vzdrževanje – V takšnih primerih se obrnite na usposobljenega tehnika.