Pomiń, aby przejść do informacji o produkcie
1 z 8

AEA Ribbon Mics | AEAZTRP20002

AEA Rack Tray

AEA Rack Tray

Cena regularna €99,00
Cena regularna Cena promocyjna €99,00
W promocji Wyprzedane
Z wliczonymi podatkami.
Custom ordered for you: Inquire for a delivery timeframe.
Ilość

AEA Rack Tray

Purpose-built for mounting your half-rack AEA units and TDI Duos, the AEA Rack Tray improves on generic solutions by mounting from the top rather than the bottom—making installation cleaner and more secure.

Compatible with the TRP2, TRP3, 1029, and TDI Duo units.

Pokaż kompletne dane
>>

Opis produktu

Mounting of TRP2, TRP3, 1029

To mount the TRP2, TRP3, or 1029, take the top plate off each unit and place the rack tray on top of the unit(s) you’re mounting, lining up the holes. Use the same screws from the top plate (or the supplied screws; they’re the same) to affix the rack tray to the unit(s). The screws used for this are 4-40 1/4″ Phillips Flathead Undercut screws.

Mounting of TDI Duos

To mount the TDI Duos, flip the Duos upside-down and place the AEA rack tray on top of them. Line up the 2 holes on the bottom of each Duo with the countersunk holes on the bottom of the AEA Rack Tray. Affix the Duos to the rack tray using the supplied 8-32 1/4″ Phillips Flathead Undercut screws. Two screws are used per TDI Duo to prevent the unit from shifting.

NOTE:

If desired, when using the Rack Tray to mount half-rack units, you can use the supplied black plugs to plug the holes for the TDI Duos. This will plug 7 of the 8 holes, as one will be obstructed by the chassis itself.

Informacje GPSR

Informacje o producencie

Audio Engineering Associates
1029 N. Allen Ave., Pasadena, CA 91104, USA

Informacje o importerze

Klemm Music Technology e.K.
Sebastian-Kneipp-Str. 96, 37217 Ziegenhagen, Deutschland