Pomiń, aby przejść do informacji o produkcie
1 z 1

AEA Ribbon Mics | AEAKU5A00001

AEA KU5A

AEA KU5A

Cena regularna €1.699,00
Cena regularna Cena promocyjna €1.699,00
W promocji Wyprzedane
Z wliczonymi podatkami.
Fresh stock is on its way!
Ilość

AEA KU5A

Super cardioid. Super versatile. Super durable.
Never before has a ribbon mic delivered as much clarity and breadth of sound in a package so fit for both studio and live settings as the supercardioid KU5A.

 

KU5A Microphone Overview

  • Supercardioid polar pattern that rejects room tone and instrument bleed
  • Detailed, extended top end with ribbon smoothness and warmth
  • Supreme durability for close-range, outdoor, and live use
  • Active electronics and custom transformer optimized for all preamps
  • Front address design with built-in yoke is simple to position
  • Integrated high-pass filter switch reduces proximity effect at close-range
  • Matte black finish is discreet on camera
  • Handmade in the U.S.A.
Pokaż kompletne dane
>>

Opis produktu

The Ribbon For Any Room

The supercardioid KU5A breaks new ground in ribbon technology with its acutely focused directionality that rejects bleed from other instruments, room reflections, and loud ambience in the studio and on stage.

Never before has a ribbon mic delivered as much clarity and breadth of sound in a package so fit for both studio and live use. As a near-field ribbon designed for close range recording, the KU5A delivers the low-end heft and pronounced midrange one expects of AEA ribbons and with moderate, manageable proximity effect. Vocalists can sing directly into the grill of the KU5A, as its interior components are the most protected of any in the AEA lineup.

The KU5A is equipped with active electronics, fit for any preamp in the studio and on the road, as well as an integrated high-pass filter to roll off low end in close range recording applications.

The Supercardioid Ribbon

The KU5A’s supercardioid polar pattern captures pure, direct sound while rejecting room tone from behind the mic. This feature prevents excessive monitor and audience bleed when tracking musicians live in one room or on stage. Traditional figure-of-8 ribbons, which distinctly incorporate both direct sound and room sound, rely on sharp nulls to reject unwanted bleed.

The KU5A’s end-address directionality and tight supercardioid pattern allow for effortless positioning on snare, toms, and other instruments that may be difficult to access. Signal bleed captured by dynamic mics and condensers often sounds harsh and brittle due to top-end frequencies. The minimal bleed captured by the KU5A sounds more natural as a result of its smooth top end and coheres well in a mix.

Active and Flexible

The active KU5A comes complete with a custom transformer and JFET electronics. It features the same custom transformer as the A440, R84A, and NUVO ribbon mics, providing greater output, less audible noise, and stable impedance. This allows for consistent frequency response and greater flexibility with different preamps, including those within audio interfaces. The boosted output of the KU5A is beneficial when recording quiet sources like vocals and soft acoustic guitars, and the active circuitry prevents noise interference. The KU5A operates with standard 48-volt phantom power.

Roadworthy Companion

Touring bands rely on the durability and low-profile of the KU5A for sound reinforcement at live shows. At outdoor festivals and indoor theaters alike, the KU5A is perfectly equipped to bring studio sound to the live stage. Its integrated windscreen protection prevents interference at windy venues and its active electronics allow for flexibility with virtually any mixing board or audio interface.

>>

Funkcje i specyfikacje

AEA KU5A

  • Operating Principle: Pressure gradient transducer
  • Directional Pattern: Supercardiod
  • Frequency Range: 20Hz to14kHz (+3/-6dB)
  • Maximum SPL: 135+ dB SPL (1% third harmonic > 1 kHz)
  • Sensitivity: -43dBV (7.08 mV/Pa) at 1 kHz, no load
  • Output Impedance: 92 Ω broadband
  • Load Impedance: 1.0 kΩ or greater
  • Phantom Power: Requires 48V Phantom Power, 7mA
  • Polarity: Pin 2 high for positive pressure on front of
    microphone
  • Switchable High-Pass Filter: 6dB/Octave at 283hz

Off-Axis Response

  • Relative Output at 180°: -12 dB
  • Angle of Max Rejection: 135°


Transducer Element

  • Material: Pure aluminum corrugated ribbon
  • Thickness: 1.8 µm
  • Width: 0.055 in (0.14 cm)
  • Length: 1.175 in (2.9 cm)


Microphone Dimensions

  • Height: 8 in (20.3 cm)
  • Width: 3 in (7.6 cm)
  • Weight: 1lb 12.6 oz (0.810 kg)
  • Shipping weight: 4 lb (1.8 kg)
  • Connector: XLR-3M wired to a 3m captive cable


Accessories Included:

  • Storage Case
  • Mic Bag
  • Users Manual

Media

> > >

Dokumenty

Informacje GPSR

Informacje o producencie

Audio Engineering Associates
1029 N. Allen Ave., Pasadena, CA 91104, USA

Informacje o importerze

Klemm Music Technology e.K.
Sebastian-Kneipp-Str. 96, 37217 Ziegenhagen, Deutschland