Ga direct naar productinformatie
1 van 6

AudioScape Engineering Co. | GS-CL20

MAP CL-20 [500-Series] Compressor

MAP CL-20 [500-Series] Compressor

Normale prijs €699,00
Normale prijs Aanbiedingsprijs €699,00
Aanbieding Uitverkocht
Belastingen inbegrepen.
Nu vooraf bestellen; vanwege de grote vraag vindt de verzending naar Europa waarschijnlijk plaats binnen 6-10 weken na aankoop.
Aantal

Instant mojo and mid-century vibe to any track

 

Introducing the MAP CL-20 Compressor/ Limiter, AudioScape's recreation of the original Melcor® CL-20 FET unit released in the late 1960’s. The CL-20, along with Melcor’s® GME-20 EQ, could often be found installed in RCA’s custom built consoles from the late 60’s/ early 70’s. A big part of the CL-20’s distinctive box tone is the 1731® discrete op-amps used. Originally designed by Melcor®, the 1731® preceded another famous Farmingdale, Long Island audio-maker’s well-known discrete op amp. AudioScape now make these lovely 1731® op amps at their factory in Florida, and the CL-20 utilizes no less than three of these discrete beauties in its circuit topology. The MAP CL-20 has been adapted to a 500 Series format.

 

**HASSLE-FREE 2-YEAR WARRANTY INCLUDED!

Alle details bekijken
>>

Productbeschrijving

The CL-20 appears deceptively simple at first blush, there’s only two controls, one for setting threshold and the other for setting make-up gain, and a meter monitoring gain reduction, but there’s quite a lot going on. The amount and the ballistics of the compression are set by the threshold level. Changes in the threshold level automatically adjust the attack and release times, simultaneously. The higher the threshold, the more subtle the compression. At lower threshold settings, the CL-20 is quite aggressive, like an 1176. Fast attack and fast release times. When adjusted to higher settings (past the 12 o’clock point), release times will slow down, however, for a much smoother, more transparent compression.

The CL-20 , like all the MAP 1731-based products, will add instant mojo and mid-century vibe to any track it’s applied to.

AudioScape is manufacturing MAP products again, bringing that classic mid-century vibe to the new millennium. In the early 70’s, MAP had descended from Melcor® Industries. When Melcor® abandoned the audio business for calculators around 1970, a group of their engineers carried on as Modular Audio Products, with the 1731® op amp at the heart of a range of products. Of course, these early discrete op amp beauties are highly sought after today. The CL-20 Compressor/Limiter joins the D.AM-27 Dual Mic Preamp in AudioScape's MAP lineup.

>>

Kenmerken & specificaties

FEATURES & SPECS:

  • VINTAGE STYLE FET COMPRESSION AT ITS FINEST
  • VINTAGE MELCOR/MAP MODULAR CONSOLE FORMAT ADAPTED FOR 500 SERIES
  • 3 QTY 1731 DISCRETE MAP OPAMPS, ALL THROUGH HOLE CONSTRUCTION LIKE THE ORIGINALS
  • CL CONTROL, ONE CONTROL TO RULE THEM ALL, TAKES THE COMPRESSION BEHAVIOUR FROM AGGRESSIVE TO TRANSPARENT, EXACTLY LIKE THE ORIGINAL
  • OUTPUT CONTROL, ADDS THE PROPER AMOUNT OF MAKEUP GAIN NEEDED AFTER COMPRESSION IS APPLIED
  • BYPASS SWITCH, USED TO BYPASS THE ORIGINAL CIRCUIT, AND IS TRUE BYPASS
  • 24MM ALPHA POTENTIOMETERS
  • PERIOD CORRECT CARBON COMPOSITION RESISTORS IN THE AUDIO PATH ALONG WITH THE CORRECT POLY FILM CAPACITORS, ALL WHERE THEY BELONG
> > >

Documenten

DOCUMENTATION:

GPSR-informatie

Informatie over de fabrikant

AudioScape Engineering Co.
1631 S Nova Road, South Daytona, FL 32119, United States of America

Informatie over de importeur

von Brönner GmbH
Franziusstr. 12, 60314 Frankfurt/Main, Germany

Waarschuwingen en veiligheidsinformatie

  • Water en vocht - Gebruik het apparaat niet in de buurt van een waterbron of in een overmatig vochtige omgeving.
  • Binnendringen van voorwerpen en vloeistoffen - Er moet op worden gelet dat er geen voorwerpen rechtstreeks op de module van de 500-serie vallen en dat er geen vloeistoffen via de openingen in de behuizing worden gemorst.
  • Ventilatie - Zorg bij installatie van het apparaat in een rack of op een andere locatie voor voldoende ventilatie. Onvoldoende ventilatie veroorzaakt oververhitting en kan het apparaat beschadigen.
  • Hitte - Het apparaat moet uit de buurt van warmtebronnen of andere warmteproducerende apparatuur worden geplaatst.
  • Voedingsbronnen - De module van de 500-serie werkt met elk standaard goedgekeurd chassis van de 500-serie, maar we raden u aan een chassis van hoge kwaliteit te kopen met voldoende vermogen om al uw units te laten werken, waarbij 500 milliampère stabiele ±16 volt voeding mogelijk is.
  • Bescherming van het netsnoer - Zorg er altijd voor dat de module van de 500-serie stevig in de connector van het chassis zit voordat u deze op het voorpaneel vastschroeft.
  • Perioden van niet-gebruik - Het netsnoer van het apparaat moet worden losgekoppeld van uw chassis van de 500-serie wanneer het gedurende langere tijd niet wordt gebruikt.
  • Schade die onderhoud vereist - Neem contact op met een gekwalificeerde technicus.