Ir directamente a la información del producto
1 de 6

AudioScape Engineering Co. | GS-CL20

MAP CL-20 [500-Series] Compressor

MAP CL-20 [500-Series] Compressor

Precio habitual €699,00
Precio habitual Precio de oferta €699,00
Oferta Agotado
Impuestos incluidos.
Resérvalo ya; debido a la alta demanda, el envío a Europa se realizará probablemente en un plazo de 6 a 10 semanas tras la compra.
Cantidad

Instant mojo and mid-century vibe to any track

 

Introducing the MAP CL-20 Compressor/ Limiter, AudioScape's recreation of the original Melcor® CL-20 FET unit released in the late 1960’s. The CL-20, along with Melcor’s® GME-20 EQ, could often be found installed in RCA’s custom built consoles from the late 60’s/ early 70’s. A big part of the CL-20’s distinctive box tone is the 1731® discrete op-amps used. Originally designed by Melcor®, the 1731® preceded another famous Farmingdale, Long Island audio-maker’s well-known discrete op amp. AudioScape now make these lovely 1731® op amps at their factory in Florida, and the CL-20 utilizes no less than three of these discrete beauties in its circuit topology. The MAP CL-20 has been adapted to a 500 Series format.

 

**HASSLE-FREE 2-YEAR WARRANTY INCLUDED!

Ver todos los detalles
>>

Descripción del producto

The CL-20 appears deceptively simple at first blush, there’s only two controls, one for setting threshold and the other for setting make-up gain, and a meter monitoring gain reduction, but there’s quite a lot going on. The amount and the ballistics of the compression are set by the threshold level. Changes in the threshold level automatically adjust the attack and release times, simultaneously. The higher the threshold, the more subtle the compression. At lower threshold settings, the CL-20 is quite aggressive, like an 1176. Fast attack and fast release times. When adjusted to higher settings (past the 12 o’clock point), release times will slow down, however, for a much smoother, more transparent compression.

The CL-20 , like all the MAP 1731-based products, will add instant mojo and mid-century vibe to any track it’s applied to.

AudioScape is manufacturing MAP products again, bringing that classic mid-century vibe to the new millennium. In the early 70’s, MAP had descended from Melcor® Industries. When Melcor® abandoned the audio business for calculators around 1970, a group of their engineers carried on as Modular Audio Products, with the 1731® op amp at the heart of a range of products. Of course, these early discrete op amp beauties are highly sought after today. The CL-20 Compressor/Limiter joins the D.AM-27 Dual Mic Preamp in AudioScape's MAP lineup.

>>

Características y especificaciones

FEATURES & SPECS:

  • VINTAGE STYLE FET COMPRESSION AT ITS FINEST
  • VINTAGE MELCOR/MAP MODULAR CONSOLE FORMAT ADAPTED FOR 500 SERIES
  • 3 QTY 1731 DISCRETE MAP OPAMPS, ALL THROUGH HOLE CONSTRUCTION LIKE THE ORIGINALS
  • CL CONTROL, ONE CONTROL TO RULE THEM ALL, TAKES THE COMPRESSION BEHAVIOUR FROM AGGRESSIVE TO TRANSPARENT, EXACTLY LIKE THE ORIGINAL
  • OUTPUT CONTROL, ADDS THE PROPER AMOUNT OF MAKEUP GAIN NEEDED AFTER COMPRESSION IS APPLIED
  • BYPASS SWITCH, USED TO BYPASS THE ORIGINAL CIRCUIT, AND IS TRUE BYPASS
  • 24MM ALPHA POTENTIOMETERS
  • PERIOD CORRECT CARBON COMPOSITION RESISTORS IN THE AUDIO PATH ALONG WITH THE CORRECT POLY FILM CAPACITORS, ALL WHERE THEY BELONG
> > >

Documentos

DOCUMENTATION:

Información GPSR

Información del fabricante

AudioScape Engineering Co.
1631 S Nova Road, South Daytona, FL 32119, United States of America

Información del importador

von Brönner GmbH
Franziusstr. 12, 60314 Frankfurt/Main, Germany

Advertencias e información de seguridad

  • Agua y humedad - No utilice la unidad cerca de ninguna fuente de agua o en entornos excesivamente húmedos.
  • Entrada de objetos y líquidos - Se debe tener cuidado para que no caigan objetos directamente sobre el módulo de la Serie 500 ni se derramen líquidos en la carcasa a través de sus aberturas.
  • Ventilación - Al instalar la unidad en un rack o en cualquier otra ubicación, asegúrese de que haya una ventilación adecuada. Una ventilación inadecuada provocará sobrecalentamiento y puede dañar la unidad.
  • Calor - La unidad debe situarse lejos de fuentes de calor u otros equipos que produzcan calor.
  • Fuentes de alimentación - El módulo de la Serie 500 funcionará con cualquier chasis estándar aprobado de la Serie 500; sin embargo, recomendamos comprar uno de alta calidad con suficiente potencia para todas sus unidades, que proporcione 500 miliamperios de corriente estable de ±16 voltios.
  • Protección del cable de alimentación - Asegúrese siempre de que el módulo de la Serie 500 esté firmemente asentado en el conector del chasis antes de atornillarlo al panel frontal.
  • Periodos sin uso - El cable de alimentación de CA debe desconectarse del chasis de la Serie 500 cuando no se utilice durante un periodo prolongado.
  • Daños que requieren servicio técnico - Por favor, consulte a un técnico cualificado.