Прескочи към информацията за продукта
1 от 6

AudioScape Engineering Co. | GS-CL20

MAP CL-20 [500-Series] Compressor

MAP CL-20 [500-Series] Compressor

Обичайна цена €699,00
Обичайна цена Цена при разпродажба €699,00
Разпродажба Изчерпано
С включени данъци.
Поръчайте предварително сега; поради голямото търсене доставката до Европа вероятно ще отнеме 6-10 седмици след покупката.
Количество

Instant mojo and mid-century vibe to any track

 

Introducing the MAP CL-20 Compressor/ Limiter, AudioScape's recreation of the original Melcor® CL-20 FET unit released in the late 1960’s. The CL-20, along with Melcor’s® GME-20 EQ, could often be found installed in RCA’s custom built consoles from the late 60’s/ early 70’s. A big part of the CL-20’s distinctive box tone is the 1731® discrete op-amps used. Originally designed by Melcor®, the 1731® preceded another famous Farmingdale, Long Island audio-maker’s well-known discrete op amp. AudioScape now make these lovely 1731® op amps at their factory in Florida, and the CL-20 utilizes no less than three of these discrete beauties in its circuit topology. The MAP CL-20 has been adapted to a 500 Series format.

 

**HASSLE-FREE 2-YEAR WARRANTY INCLUDED!

Покажи пълните подробности
>>

Описание на продукта

The CL-20 appears deceptively simple at first blush, there’s only two controls, one for setting threshold and the other for setting make-up gain, and a meter monitoring gain reduction, but there’s quite a lot going on. The amount and the ballistics of the compression are set by the threshold level. Changes in the threshold level automatically adjust the attack and release times, simultaneously. The higher the threshold, the more subtle the compression. At lower threshold settings, the CL-20 is quite aggressive, like an 1176. Fast attack and fast release times. When adjusted to higher settings (past the 12 o’clock point), release times will slow down, however, for a much smoother, more transparent compression.

The CL-20 , like all the MAP 1731-based products, will add instant mojo and mid-century vibe to any track it’s applied to.

AudioScape is manufacturing MAP products again, bringing that classic mid-century vibe to the new millennium. In the early 70’s, MAP had descended from Melcor® Industries. When Melcor® abandoned the audio business for calculators around 1970, a group of their engineers carried on as Modular Audio Products, with the 1731® op amp at the heart of a range of products. Of course, these early discrete op amp beauties are highly sought after today. The CL-20 Compressor/Limiter joins the D.AM-27 Dual Mic Preamp in AudioScape's MAP lineup.

>>

Характеристики и спецификации

FEATURES & SPECS:

  • VINTAGE STYLE FET COMPRESSION AT ITS FINEST
  • VINTAGE MELCOR/MAP MODULAR CONSOLE FORMAT ADAPTED FOR 500 SERIES
  • 3 QTY 1731 DISCRETE MAP OPAMPS, ALL THROUGH HOLE CONSTRUCTION LIKE THE ORIGINALS
  • CL CONTROL, ONE CONTROL TO RULE THEM ALL, TAKES THE COMPRESSION BEHAVIOUR FROM AGGRESSIVE TO TRANSPARENT, EXACTLY LIKE THE ORIGINAL
  • OUTPUT CONTROL, ADDS THE PROPER AMOUNT OF MAKEUP GAIN NEEDED AFTER COMPRESSION IS APPLIED
  • BYPASS SWITCH, USED TO BYPASS THE ORIGINAL CIRCUIT, AND IS TRUE BYPASS
  • 24MM ALPHA POTENTIOMETERS
  • PERIOD CORRECT CARBON COMPOSITION RESISTORS IN THE AUDIO PATH ALONG WITH THE CORRECT POLY FILM CAPACITORS, ALL WHERE THEY BELONG
> > >

Документи

DOCUMENTATION:

Информация за GPSR

Информация за производителя

AudioScape Engineering Co.
1631 S Nova Road, South Daytona, FL 32119, United States of America

Информация за вносителя

von Brönner GmbH
Franziusstr. 12, 60314 Frankfurt/Main, Germany

Предупреждения и информация за безопасност

  • Вода и влага - Не използвайте устройството в близост до източници на вода или в прекомерно влажна среда.
  • Проникване на предмети и течности - Трябва да се внимава върху модула от серия 500 да не падат директно предмети и в корпуса да не се разливат течности през неговите отвори.
  • Вентилация - Когато инсталирате устройството в стелаж или на друго място, уверете се, че има адекватна вентилация. Неправилната вентилация ще доведе до прегряване и може да повреди устройството.
  • Топлина - Устройството трябва да бъде разположено далеч от източници на топлина или друго оборудване, което произвежда топлина.
  • Източници на захранване - Модулът от серия 500 ще работи с всяко стандартно одобрено шаси от серия 500, но препоръчваме да закупите висококачествено такова с достатъчен капацитет за работа на всички ваши устройства, позволяващо 500 милиампера стабилно захранване от +/-16 волта.
  • Защита на захранващия кабел - Винаги се уверявайте, че модулът от серия 500 е плътно прилепнал в слота на шасито от серия 500, преди да го закрепите с винтове към предния панел.
  • Периоди на неизползване - Захранващият кабел за променлив ток на устройството трябва да бъде изключен от вашето шаси от серия 500, когато не се използва за продължителен период от време.
  • Повреди, изискващи сервиз - Моля, обърнете се към квалифициран техник.